Made using 'RX320' fishing boat. Reclaimed elm and oak planking, copper nails.
Robin & Cheeky Blackbird
Made using 'RX320' fishing boat. Reclaimed elm and oak planking, copper nails.
Reaching Oystercatcher
Made using reclaimed RX320 timber. Cut from the elm planking showing a scarf join, original tar and copper nails and roves. Set on a section of the wheel house, sitting in steel bolts.
Curlew Seeking
Made using 'RX320' fishing boat. Reclaimed elm and oak planking, copper nails.
Lookout Redshank
Made using elm planking with the original copper nails and roves. Finished with a wax polish.
Redshank Searching
Made using elm planking with the original copper nails and roves. Finished with a wax polish.
Rye Oystercatcher
Made using black tar soaked elm planking with the original copper nails and roves. Set on a slice of oak from the runners off the boats hull. Finished with a wax polish.
Bronze Oystercatcher
Wooden oystercatcher sand cast using the bronze from RX320's drive shaft. set on a slice of oak runner taken from the boats hull.
Resin Oystercatcher
Original wooden Oystercatcher cast using Resin and silicone mould making techniques
'Bullion' Pendant
Made using a slice of oak with iron-tannin, cut from a runner off the hull of RX320, held by an original copper nail remoulded into a ring. Hung on a black waxed cord.
'Midway' Pendant
Made using a slice of oak with iron-tannin, cut from a runner off the hull of RX320, held by an original copper nail remoulded into a loose clasp, measurements, 600mm L, 400mm W, 4mm D. Hung on a black waxed cord.
'Orkney' Pendant
Made using a slice of oak with iron-tannin, cut from a runner off the hull of RX320, held by an original copper nail remoulded into a loose clasp. Hung on a black waxed cord.
RX320's Original copper nails and roves
Raw materials
Oak with iron-tannin
Oak with iron-tannin.
RX320 Jewellery collection
Copper clasp
Made using RX320 original copper nail remoulded into a loose clasp,
